Material Safety Data Sheet
Dryseal
unknown | en
Attributes
| Weight |
0.043 lb
|
|---|---|
| Break Quantity |
1
|
| Optional Package/Box Quantity |
1
|
| Material |
303 Stainless Steel
|
| Component Material |
Yellow Plastic Cap
|
| Male Thread |
NPT
|
| Temperature Range |
-40°F to 150°F
|
| Length |
1.61"
|
| Hose ID |
1/4"
|
| Hex |
9/16"
|
| Male Thread Size |
1/4"-18
|
| Pressure Rating |
Details
Construction
Installation
- Assembly Instructions:
- 1. Trim hose end with smooth square cut.
- 2. Lubricate either push-on fitting, hose or both.
- 3. Insert push-on fitting into hose until first barb is in hose.
- 4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.
Instructions
- Disassembly instructions:
- 1. Leaving push-on fitting in place, make a 1" cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.
- 2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose.
Note
No hose clamps or ferrules are needed
Safety Notes
- Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.
- Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
Specifications
- Number of Barbs: 2
- Barb Length: .77"
WARNING: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
Resources
Image
Product Literature
Push-Lock Hose Fittings - Data Sheet
Catalog Page