Conexiones Push-On Hembra NPTF x Barbas para Manguera

2740808CBC - Conexiones Push-On Hembra NPTF x Barbas para Manguera

Dixon Distributor?

Log in to view pricing, inventory, place orders & much more. If you want to create an account, please click the button to begin the registration process.

Atributos
Detalles
Recursos
Productos Relacionados

Atributos

Peso	0.1 lb
Compra Minima	1
Paquete Opcional/Cantidad por Caja	1
Material	Latón
Material de Componentes	Tapa de latón
Rosca Hembra	NPTF
Rango de Temperatura	-40°F a 150°F (-40°C a 65.6°C)
Longitud	1.76"
DI de Manguera	1/2"
Hex	15/16"
Valor de Presión	350 PSI
Tamaño de Rosca Hembra	1/2"-14

Detalles

Construction

Dryseal

Installation

Assembly Instructions:
1. Trim hose end with smooth square cut.
2. Lubricate either push-on fitting, hose or both.
3. Insert push-on fitting into hose until first barb is in hose.
4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.

Instructions

Disassembly instructions:
1. Leaving push-on fitting in place, make a 1" cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.
2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose.

Note

No hose clamps or ferrules are needed

Safety Notes

Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.
Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.

Specifications

Number of Barbs: 2
Barb Length: 1.02"

Advertencia: Los productos Dixon pueden contener químicos identificados por el estado de California como causantes de cáncer, defectos de nacimiento, o problemas de reproducción.